The life of LED strip light is because LED is a constant current element, and the constant current effect of LED light strip produced by different manufacturers is different, of course, the life is also different. If the toughness of the copper wire or flexible circuit board of the light strip is not good, it will also affect the life of the LED strip light.
Precautions for LED strip light maintenance
1. Anti-static: LED is an electrostatic sensitive component, if anti-static measures are not taken when maintaining the light strip, it will cause the LED to burn out. Here, an antistatic soldering iron must be used for the soldering iron, and maintenance personnel must also take antistatic measures (e.g. wear anti-static rings and anti-static gloves, etc.).
2. High temperature resistance: The two important components of LED strip light, LED and FPC, are products that cannot withstand high temperature. If the FPC continues to remain hot or exceeds what it can withstand, the FPC's overlay film will blister, which will directly lead to the scrapping of the LED strip. At the same time, LEDs cannot withstand high temperatures continuously, and chips burn for a long time at high temperatures. Therefore, the soldering iron used to repair the LED strip light must be a temperature-controlled soldering iron, and the temperature is limited, and it is forbidden to change or set it at will.
3. Short circuit: If there are many light strips, either the pin is short-circuited, or there is a defect, the cause must be found out, and then repaired. Otherwise, after hastily replacing the bad LED, the LED chip will continue to be damaged by the short-circuit current when it is powered on again. Therefore, before replacing the new LEDs, you must first determine the cause in order to do more with less.
